ASTM B705 Welded Pipe is manufactured from commercially pure titanium and titanium alloys, offering exceptional resistance to corrosion, superior durability, and a high strength-to-weight ratio. These properties make ASTM B705 welded pipes the preferred choice for industries operating in aggressive chemical, marine, and high-temperature environments.
As a trusted manufacturer, supplier, and exporter, Shubham Metals delivers ASTM B705 Welded Pipe solutions that meet stringent international standards while ensuring long service life and operational reliability.
ASTM B705 Welded Pipe as a Preferred Titanium Specification for Industrial Use
ASTM B705 is a specialized standard covering titanium and titanium alloy welded pipes intended for pressure and corrosion-resistant applications. Unlike conventional metallic piping, titanium pipes manufactured under this specification offer:
- Outstanding resistance to seawater, chlorides, and oxidizing media
- Excellent performance at elevated temperatures
- Minimal maintenance over long operational cycles
- Compatibility with critical process fluids
ASTM B705 Welded Pipe is especially valued where failure risks, contamination, or frequent replacement are unacceptable.
Typical Industrial Applications of ASTM B705 Welded Pipe
The versatility of ASTM B705 Welded Pipe allows it to be used across multiple industries where corrosion resistance and material stability are critical.
These pipes are commonly used in:
- Chemical and petrochemical processing plants
- Heat exchangers and condenser systems
- Desalination and seawater piping
- Offshore oil & gas installations
- Power generation and thermal systems
- Aerospace and high-performance engineering setups
Titanium’s natural oxide film provides inherent protection, making ASTM B705 Welded Pipe highly reliable even under continuous exposure to aggressive media.
Titanium Grades Available Under ASTM B705 Welded Pipe
ASTM B705 Welded Pipe covers a range of commercially pure titanium and alloy grades, each designed to meet specific service requirements.
Commonly Supplied Grades
|
Grade |
UNS No. |
Key Characteristics |
|
Grade 1 |
R50250 |
Excellent corrosion resistance, highest ductility |
|
Grade 2 |
R50400 |
Balanced strength and corrosion resistance, most widely used |
|
Grade 3 |
R50550 |
Higher strength for moderate pressure applications |
|
Grade 5 |
R56400 |
High strength titanium alloy for demanding environments |
|
Grade 7 |
R52400 |
Enhanced corrosion resistance in reducing acids |
Grade selection depends on pressure, temperature, chemical exposure, and mechanical stress.
Why Engineers Choose ASTM B705 Welded Pipe Over Other Materials
ASTM B705 Welded Pipe offers clear advantages over stainless steel, copper alloys, and nickel-based materials in certain environments.
Key benefits include:
- Resistance to chloride-induced stress corrosion cracking
- Long-term stability in seawater and brine solutions
- Reduced system weight without compromising strength
- Lower total lifecycle cost despite higher initial investment
For long-term projects, ASTM B705 Welded Pipe delivers consistent performance and reduced downtime.
Chemical Composition Control in ASTM B705 Welded Pipe
The corrosion resistance of ASTM B705 Welded Pipe depends heavily on strict chemical composition limits.
Typical Chemical Composition – Titanium Grade 2
|
Element |
Maximum % |
|
Oxygen |
0.25 |
|
Iron |
0.30 |
|
Carbon |
0.10 |
|
Nitrogen |
0.03 |
|
Hydrogen |
0.015 |
|
Titanium |
Balance |
Precise control of interstitial elements ensures excellent weldability and long-term corrosion resistance.
Mechanical Performance of ASTM B705 Welded Pipe
ASTM B705 Welded Pipe maintains its mechanical integrity across a wide temperature range, making it suitable for both ambient and elevated temperature service.
Typical Mechanical Properties – Grade 2
|
Property |
Value |
|
Tensile Strength |
≥ 345 MPa |
|
Yield Strength |
≥ 275 MPa |
|
Elongation |
≥ 20% |
|
Density |
4.51 g/cm³ |
The combination of strength and ductility allows ASTM B705 Welded Pipe to handle thermal expansion, vibration, and pressure fluctuations effectively.
Manufacturing Process of ASTM B705 Welded Pipe
Producing ASTM B705 Welded Pipe requires specialized manufacturing controls due to titanium’s sensitivity to contamination.
The process typically includes:
- Cold forming of titanium strip or sheet
- Precision welding using TIG (GTAW) under inert gas shielding
- Controlled heat treatment when required
- Dimensional calibration and straightening
- Surface cleaning to remove contaminants
This process ensures uniform weld seams, consistent metallurgical structure, and reliable performance in service.
Size Range & Customization Options
ASTM B705 Welded Pipe is available in a wide range of dimensions to suit diverse engineering requirements.
Pipes can be supplied in:
- Standard and custom outside diameters
- Various wall thicknesses as per design needs
- Fixed lengths or cut-to-length
- Plain or beveled ends
- Mill finish, pickled, or polished surface finishes
Custom specifications are supported for heat exchangers, condensers, and critical assemblies.
Testing, Inspection & Quality Assurance
Every ASTM B705 Welded Pipe supplied by Shubham Metals undergoes comprehensive testing to ensure compliance with international standards.
Testing includes:
- Chemical analysis verification
- Tensile and elongation testing
- Flattening and bend tests
- Visual and dimensional inspection
- Non-destructive testing when specified
Each shipment is accompanied by EN 10204 3.1 test certification, ensuring full material traceability.
ASTM B705 Welded Pipe Suppliers in Bangalore, India – Reliable Titanium Solutions
Shubham Metals is a dependable ASTM B705 Welded Pipe supplier in Bangalore, India , supporting domestic industries with high-quality titanium piping.
We offer:
- Consistent quality material
- Ready stock and project-based supply
- Competitive pricing
- Timely nationwide delivery
? Contact us today for stock availability and pricing.
ASTM B705 Welded Pipe Dealers in Bangalore, India – Quality You Can Trust
As experienced ASTM B705 Welded Pipe dealers in Bangalore, India , we ensure that every product meets strict quality and documentation requirements.
Our strengths include:
- Authentic ASTM-compliant material
- Complete certification support
- Assistance in grade selection
- Transparent and professional service
? Speak with our experts to select the right grade for your application.
ASTM B705 Welded Pipe Exporters in Bangalore, India – Serving Global Industries
Shubham Metals is also a trusted ASTM B705 Welded Pipe exporter in Bangalore, India , supplying titanium pipes to international markets.
Export capabilities include:
- Export-grade packaging
- Third-party inspection coordination
- Compliance with international standards
- Reliable global logistics support
? Send us your export enquiry today.
Why Choose Shubham Metals for ASTM B705 Welded Pipe?
Choosing the right supplier is as important as choosing the right material. At Shubham Metals, we combine product expertise with customer-focused service.
- In-depth knowledge of titanium metallurgy
- Strict quality control and traceability
- Flexible supply for small and large projects
- Competitive pricing without compromising quality
- Responsive technical and commercial support
We don’t just supply ASTM B705 Welded Pipe—we help our customers build reliable systems with confidence.
Get in Touch for ASTM B705 Welded Pipe Requirements
If your application demands exceptional corrosion resistance, durability, and performance, ASTM B705 Welded Pipe is the ideal solution.
? Request a Quote
? Discuss Technical Specifications
? Plan Domestic or Export Supply
? Call or WhatsApp Shubham Metals for expert assistance
Technical Specifications
| ASTM B705 Welded Pipe – Technical Specifications | |
|---|---|
| Specification | ASTM B705 |
| Covered Grades | N06625, N08825 |
| Size Range | 1/8" NB to 30" NB (3 mm to 750 mm OD) |
| Schedule | SCH 5S, 10S, 20, 40, 40S, 80, 80S, 160, XXS |
| Wall Thickness | 0.5 mm to 80 mm |
| Length | Single Random, Double Random, Cut to Size |
| Form | Seamless / Welded / ERW / EFW / Fabricated |
| End Finish | Plain End, Bevelled End, Threaded End |
| Specifications | ASTM / ASME / DIN / EN / JIS |
| Surface Finish | Pickled, Annealed, Polished, BA, 2B, No.4 |
| Testing | Hydrostatic, Eddy Current, IGC, PMI, Hardness, Ultrasonic |
| Certification | EN 10204 3.1 / 3.2 Mill Test Certificate |
